1. Top Cover Rubber
The top cover are made of special rubber compound to cover the inner reinforcing layers of a conveyor blet.
Top cover is usually thicker than the bottom cover and can be made as flatbed or chevron. If the material
to be conveyed is sharp (e.g. glass pieces, rocks, minerals, grains, etc.), the appropriate thickness of
the top cover will also help extend the usage life of the conveyor belt.
2. Skim Coat Rubber
A special rubber compound that works like a glue coated on the reinforcing fabric to help strengthening the
bonding between the inner rubber and cover rubber.
3. EP Fabric (Carcass)
The reinforcing layer made of polyester fabric that gives high tensile strength and also
flexible enough to support the conveying materials. There are several specifications of
polyester fabric depending on the size of the thread. The bigger the thread, the higher
tensile strength it can support.
4. Bottom Cover Rubber
The same as top cover rubber but usually thinner because it was not designed to receive
any impact from the material as the top cover.
** The rubber compound for the top and bottom cover has many grades. Each grade is
suitable for a particular material and working environment. You can find more detail
in the product section,
or email us for more information.
|
