Belt Structure
   • Layers
   • EP Fabric
   Rubber Grade
   Elevator Belt
   Endless Belt
   Chevron Belt
   Super Flex Belt
   Food Grade Belt
Home > Products > Endless Conveyor Belt
Our Conveyor Belt
Endless Conveyor Belt
With our experiences in the field and constant product development, we are the first and only conveyor belt manufacturer in Thailand that can manufacture the special endless conveyor belt. Previously, a conveyor belt was made to the required length, then cut and join together using the approach called 'belt splicing'. The splicing point then becomes the weakest point on the conveyor belt. No matter how good the splicing work is, it is still the first point where the belt could get damaged. In some intensed working environment, the splicing joint usually was the cause of the break-down.

We have developed a new technique in fabricating endless conveyor belt. The whole conveyor belt was made in a circular shape, that means there is no weak point on the whole conveyor belt. Therefore, the endless conveyor belt can last longer than the conventional jointed belt, which reducing the break-down for fixing or replacing the belt. We can manufacture endless conveyor belt as wear resistance (Grade P, N, or M), oil resistance (OR1, OR2), and heat resistance (HR100, HR120, HR150). Please contact us for more detail.
  Endless Conveyor Belt Additional Properties
 
  • With the fabricating technique that form the endless conveyor belt, it gives a very good tensile to the belt.
  • Our endless conveyor belt can be installed without worrying about direction since it has no joint. All problems caused by belt joint will not happen.
    
  Applications
 
Suitable for any industry where break-down problems mostly caused by damaged in belt joint where there are high load and continuous operation, e.g. belt inside sand blasting machine, high-speed drive of the belt, etc.
   
 
Belt Properties Grade
P N M OR1 OR1 HR100 HR120 HR150
 
Tensile between Top Cover and Carcass (Min.) N/mm 12 12 12 12 12 12 12 12
Tensile between Carcass layers (Min.) N/mm 12 12 12 12 12 12 12 12
Tensile between Bottom Cover and Carcass (Min.) N/mm 12 12 12 12 12 12 12 12
Tensile Strength (Min.) MPa 15 20 25 8 8 12 10 10
Elongation at Break (Min.) % 350 400 450 350 300 350 250 250
Abrasion (mm³) 250 150 120 Good Good Good Good Good
Hardness °A 60 - 65 60 - 65 60 - 65 60 - 65 60 - 65 60 - 65 60 - 65 60 - 65
Extension Ratio % 0.5 - 1 0.5 - 1 0.5 - 1 0.5 - 1 0.5 - 1 0.5 - 1 0.5 - 1 0.5 - 1
Tear Resistance Good Very Good Excellent Good Good Good Good Good
Ross Flexing Good Good Good Good Good Good Good Good
Oil Resistance Poor Poor Poor Excellent Excellent Fair Fair Fair
Acid-Alkaline Resistance Poor Poor Poor Fair Fair Fair Fair Fair
Operating Temperature (Max.) °C 80 80 80 80 100 100 120 150
Width and Length of Endless Conveyor Belt
Width
[mm.]		 Minimum
Length [M]		 Maximum
Length [M]
150 - 550 2.8 6
600 - 1400 2.8 6
 
Thickness and Weight of Belt
No. of Ply Thickness [mm.] Weight/M² [Kgs.]
Top Bottom Total
2 2.5 1.5 6 7.80
3 2.5 1.5 7 9.10
4 3.5 1.5 10 11.70
5 3.5 1.5 10 13.00
6 4 2 12 15.60
   
Please Note!  The given sizes and specifications shown in the table are the most ordered sizes. Other sizes can also be made. For your specific specification, please contact us for more detail.
 
Recommended Minimum Pulley Diameters, EP Tensile Strength, Conveying Material Load
Ply Description Fabric
EP-120 EP-160 EP-200 EP-250
2 Minimum Pulley Diameters [mm.] 250 300 350 400
EP Tensile Strength [Kg./cm. Width] 240 320 400 500
Conveying Material Load [Kg./cm. Width] 24 32 40 50
3 Minimum Pulley Diameters [mm.] 300 350 400 450
EP Tensile Strength [Kg./cm. Width] 360 480 600 750
Conveying Material Load [Kg./cm. Width] 36 48 60 75
4 Minimum Pulley Diameters [mm.] 450 500 550 600
EP Tensile Strength [Kg./cm. Width] 480 640 800 1000
Conveying Material Load [Kg./cm. Width] 48 64 80 100
5 Minimum Pulley Diameters [mm.] 500 600 650 700
EP Tensile Strength [Kg./cm. Width] 600 800 1000 1250
Conveying Material Load [Kg./cm. Width] 60 80 100 125
6 Minimum Pulley Diameters [mm.] 650 700 800 850
EP Tensile Strength [Kg./cm. Width] 720 960 1200 1500
Conveying Material Load [Kg./cm. Width] 72 96 120 150
 
 
Home  | About us  |  Products  |  Technology  |  News  |  Contact us


International Sales, please contact MUI Asia Pacific, [email protected]
 
M.U.I. Rubber Belt Company Limited
51/231 Moo 2, Ngamwongwan Soi 8, Ngamwongwan Rd.,
Bangkhen, Muang, Nonthaburi THAILAND 11000
Tel: +6636329559   Fax: +6636329546   e-mail: [email protected]
Copyright © 2008 mui Rubber Belt Co.,Ltd . All Rights Reserved.